New Lens Aperture Flex Cable For Canon EF 16-35mm f/2.8L II USM Camera Part

Canon EF 16-35mm f/2.8L II USM Lens Repair Part

Product Features:

• Brand new, not pulled from a used lens
• 100% tested and guaranteed to be in perfect working condition
• Includes a free 3M double-sided tape for easy installation
• Fast and easy to install, only takes a few minutes
• Professional installation recommended

Compatibility:

• Canon EF 16-35mm f/2.8L II USM Lens

Symptoms of a faulty lens aperture flex cable:

• The aperture doesn’t change when you rotate the aperture ring on the lens
• The camera displays an error message when you try to take a picture
• The lens makes a grinding noise when you try to focus

Replacing the lens aperture flex cable is a relatively easy repair that can be done in a few minutes. Here are the steps on how to replace the cable:

1. Remove the four screws that hold the lens mount in place.
2. Gently lift the lens mount off the camera body.
3. Locate the lens aperture flex cable. It is a thin, ribbon-like cable that connects the lens mount to the camera body.
4. Disconnect the lens aperture flex cable from the camera body.
5. Connect the new lens aperture flex cable to the camera body.
6. Replace the lens mount on the camera body and tighten the four screws.
7. Test the lens to make sure it is working properly.

Package Includes:

• 1x Lens Aperture Flex Cable For Canon EF 16-35mm f/2.8L II USM Camera Part
• 1x 3M double-sided tape